Cyber-shot™ Digital Cameras

Note:

• This camera is water-proof/dust-proof equivalent to IEC60529 IP58. The camera is operable up to a water depth of 3 m for 60 minutes.
• Do not use in hot springs.
• Use the camera in the recommended operating water temperature range of -10°C to +40°C (14°F to 104°F).
• Conforming to MIL-STD 810F Method 516.5-Shock standards, this product has passed testing when dropped from a height of 1.5 m above a 5-cm thick plywood board*.
  *Depending on use conditions and circumstances, no guarantee is made regarding damage to, malfunction of, or the water-proof performance of this camera.
• As for dust-proof/shock-proof performance, there is no guarantee that the camera will not become scratched or dented.
• Sometimes water-proof performance is lost if the camera is subjected to a strong shock such as from being dropped. We recommend the camera be inspected at an authorized repair shop for a fee.
• Accessories supplied do not meet water-proof, dust-proof, and shock-proof specifications.

Notes before using the camera under/near water

• Make sure that no foreign matter such as sand, hair, or dirt gets inside the battery/memory card cover or multi-connector cover.
  Even a small amount of foreign matter may lead to water entering the camera. If dirt or sand gets on the cover or the sealing gasket, wipe the area clean with a soft cloth that will not leave behind any fibers.
   
• Confirm that the sealing gasket and its mating surfaces have not become scratched.
  Even a small scratch may lead to water entering the camera. If the sealing gasket or its mating surfaces become scratched, take the camera to an authorized repair shop to have the sealing gasket replaced for a fee.
• Do not open/close the battery/memory card cover or multi-connector cover with wet or sandy hands.
  There is a risk this will lead to sand or water getting inside. Before opening the cover, perform the procedure described in “Cleaning after using the camera under/near water”.
• Always confirm that the battery/memory card cover and multi-connector cover have been securely locked.
   
  
   

Notes on using the camera under/near water

• Do not subject the camera to shock such as from jumping into water.
• Do not open and close the battery/memory card cover or multi-connector cover while under/near water.
• Use a separately available Marine Pack (MPK-THJ) if going more than 3 meters under water.
• This camera sinks in water.
  The optional Floating Camera Strap (STP-FSA) prevents the camera from sinking in case you drop the camera in the water.

Cleaning after using the camera under/near water

• Always clean the camera with water after use within 60 minutes, and do not open the battery/memory card cover before cleaning is finished.
  Sand or water may get inside places where it cannot be seen. If not rinsed, water-proof performance will be degraded.
  
• Do not directly subject the camera to flowing water such as tap water.
  
• Bubbles may appear when the camera is placed under water. This is not a malfunction.
• After rinsing, wipe away water drops with a soft cloth. Allow the camera to dry completely in a shady location with good ventilation. Do not blow dry with a hair dryer as there is a risk of deformation and/or degraded waterproof performance.
• This camera is constructed to drain water. Water will drain from openings around the ON/OFF (Power) button, zoom (W/T) lever, and other controls. After removing from water, place the camera on a dry cloth for a while to allow water to drain.
• The camera body may become discolored if it comes in contact with sunscreen or suntan oil. If the camera does come in contact with sunscreen or suntan oil, quickly wipe it clean.
• Do not allow the camera to sit with salt water inside or on the surface. This may lead to corrosion or discoloration, and degradation of water-proof performance.
• To maintain the water-proof performance, we recommend that once a year you take the camera to your dealer, or to an authorized repair shop, to have the sealing gasket of the battery/memory card cover, or of the multi-connector cover replaced for a fee.