Article ID : S500017911 / Last Modified : 11/04/2018

What are the conditions for high speed dubbing to DVD?

Conditions for high speed dubbing to DVD.

Applicable Products and Categories of This Article

Conditions for high speed dubbing to DVD are as follows:
  1. Digital Recording: 
    High speed dubbing to DVD is not possible in DR mode.

  2. Analog or Line Recording:
    High speed dubbing to DVD is possible if all three conditions (Setting, Aspect Ratio and Audio) are fulfilled.

    For example: User can select high speed dubbing when
    - Select HQ recording mode
    - Bilingual Recording Setting is set to OFF
    - Dubbing mode is Original
    - Aspect ratio is 16:9
    - Audio mode is Stereo
    - DVD-RW (Video) is used.  

    1. Setting
    Recording Mode Bilingual Recording Setting  Dubbing mode  High speed
    DVD Video DVD VR DVD +VR

    HQ, SP, LP, EP

     

    OFF Original O X O
    ON Original X O X


    2. Detail specification about Aspect Ratio
    Recording Mode Aspect Ratio High speed
    DVD Video DVD VR DVD +VR

    HQ, SP

    16:9 O O O
    4:3 O O O
    16:9 and 4:3 X O X

    LP, EP

    16:9 X O X
    4:3 O O O
    16:9 and 4:3 X O X


    3. Detail specification about Audio
    Recording Mode Audio Mode High speed
    DVD Video DVD VR DVD +VR

    HQ, SP,

    LP, EP

    Stereo O O O
    Dual mono X O X
    Dual mono and Stereo X O X


    Note: Use the following DVD media for high speed dubbing 
    DVD Video: DVD-R, DVD-RW
    DVD VR: DVD-R, DVD-RW
    DVD +VR: DVD+R, DVD+RW