Applicable Models

This information is for the following models:

  • DSC-RX0

About this download

Benefits and improvements from the latest update

  • A Zoom function is added
    3 zoom settings are available: Smart zoom, ClearImage Zoom and Digital Zoom.
    Note that the zoom feature is also available when using the shooting grip VCT-SGR1 sold separately.
    For more information about these functions, please download the updated Help Guide.
  • Other improvements
    Improves the overall stability of the camera.

Previous Benefits and Improvements

The following benefits and improvements are also included in this update.

  • Supports the "Camera Control Box" (model CCB-WD1) for Wired Multi-View Shooting
  • Improves the Wireless Multi-View Shooting feature with the PlayMemories™ Mobile Application *1*2*3

    *1: Depending on the specifications of the access point, mobile device used, and the radio wave environment, the number of devices that can be connected can change. Up to 50 units connection have been successfully tested (based on Sony tests)
    *2: PlayMemories™ Mobile Application version 6.2 is required
    *3: Sony recommends only using secure Wi-Fi connections

File Info

File Name

  • DSC-RX0 System Software (Firmware) Update Ver.3.00 (Mac)

File Version

  • 3.00

File Size

  • 158.7 MB (158,684,967 bytes)

Release Date

  • 18/10/2018

Preparation

Check the system software version

Follow the instructions below to check the system software version. If the system software version is Ver.3.00, the update is not required.

  1. Select Menu > Setup subpage [5] > Version on the camera.
  2. The system software version is displayed as illustrated below.

System Requirements

Operating Systems

The latest version of the system software update is compatible with the following Macintosh versions:

  • Mac OS X v.10.10 – 10.11 / macOS 10.12 – 10.13

Computer Hardware

The latest version of the system software update is compatible with the following hardware:

  • Hard drive space: 600 MB or more
  • RAM: 512 MB or more

Other Hardware

  • Power source for the device.
    Fully charged rechargeable battery pack NP-BJ1.
    Note: The update can only be performed when the battery power level is (three bars) or more. We recommend that you use a fully charged battery.
  • USB cable supplied with the device
    Note: Update functionality is not guaranteed with any other USB cable.

Download & Install

Important Notice

  • Use a fully charged rechargeable battery pack NP-BJ1.
  • Do not remove the battery during the update; as the sudden loss of power may render the camera inoperable.
  • Remove the memory card from the camera before starting the update process.
  • Prevent your computer from entering Sleep mode.
  • Do not connect the camera to other any other devices except your computer.

How to download the Updater:

  1. Make sure that you are logged on as a user with administrative rights.
  2. After reading the disclaimer, click Download.
  3. The file [Update_DSCRX0V300.dmg] file will start downloading.
  4. Save the file to the desktop of your computer (recommended).

Step 1: Start the Updater

  1. Close all currently running programs on your computer.
  2. Double-click the [Update_DSCRX0V300.dmg] file you downloaded. Do not connect the camera at this point.
  3. [Update_DSCRX0V300] is expanded.
  4. Double-click the [UpdateSetting Tool] icon.
  5. To load a kernel extension, the message prompts you to allow the application to make changes. Type the password for the administrative account.

    • For macOS 10.13 user
        After the message from the system is displayed, the security and privacy screen will be displayed.
      • If a system message is displayed, click [OK] to close.

      • Read the "Sony Corporation" system software.
        Note: If you approved in the past, the security and privacy screen will not be displayed.
        If security and privacy screens remain displayed, please close the window.
      • If you are asked to restart macOS after pressing the [Allow] button, please restart and return to the beginning of the update procedure.

      • Check [Security and privacy] and click [OK].
    • For macOS 10.12 or lower or authorized macOS 10.13 user
        The following procedure will be displayed.
      • A dialog for USB connection will be displayed.
      • Connect the camera and PC with the USB cable(supplied).”USB Mode” appears on the LCD monitor of the camera.
      • Click [OK].
  6. The System Software Updater starts.


  7. Turn on the camera.
  8. Following the instructions in the System Software Updater window, on the camera, select Menu > Setup subpage [3] > USB Connection and check if Mass Storage is selected. If a mode other than Mass Storage is selected, please select Mass Storage.


  9. Connect the camera to the computer with the supplied USB cable. "USB Mode" appears on the LCD screen of the camera.
    Note: If the computer cannot find the device, the message "Could not find the camera for this update" is displayed on the computer screen. Please try the following:
    • Disconnect the USB cable and connect it again.
    • If the computer has multiple USB terminals, try with the other terminals.

    Sometimes when the camera is connected to the computer with the USB cable, a message prompting you to restart the computer may be displayed. In this case, remove the battery pack from the camera, reboot the computer, and follow the instructions from "2. Start the System Software Updater".
  10. Click [Next]. The current version number and updated version number appear on the lower left side of the screen. After confirming that the current software version is "Ver.2.00 or earlier", click Next. If the current system software version is 3.00 or later, the update is not required. In this case, disconnect the camera from the computer and click Finish. Turn off the camera, remove the battery pack, reinsert the battery and turn the camera back on.
    Update is required


    Update is not required


  11. After confirming that the current software version is "Ver.2.00 or earlier", click Next.
  12. The camera is automatically reset.
    The screen below is displayed.

    Note: the Loading icon may not be displayed depending on the OS version that you are using.

  13. Start the update
    After automatically resetting, the following screen is shown and the update starts. The progress bar appears during the update process (approximately 10 minutes).
    Note: Never turn off the camera or disconnect the USB cable while updating.


  14. Complete the update
    When the update is complete, the camera will automatically restart. Make sure that the camera is turned on and wait until the LCD screen appears again. Click Finish when the LCD screen appears and disconnect the USB cable.

    Note: After restarting, a data recovery warning is sometimes displayed. This is normal. Please wait until this warning disappears.

Step 2: Confirm the system software version of your device is Ver.3.00.

  1. On the camera, select Menu > Setup subpage [5] > Version
  2. The system software version is displayed as illustrated below.

Questions & Answers

The update does not complete

When the monitor remains black for more than 15 minutes, follow these steps to troubleshoot the issue:

  1. Disconnect the USB cable from the computer.
  2. Remove the battery and AC adapter from the camera, leave it for a few minutes, then insert the battery again or connect the AC adapter.
  3. Restart the computer.
  4. Turn on the camera and perform the installation process again.