Applicable Models

This information is for the following models:

  • KD-65X7500H
  • KD-55X7500H
  • KD-49X7500H
  • KD-43X7500H
  • KD-55X7577H
  • KD-65X7577H
  • KD-65X7400H
  • KD-55X7400H
  • KD-43X7400H

About this download

Benefits and Improvements

  • Adds a Timer widget to the Home screen
  • Add support for South Africa Parental Rating
  • Resolves an issue where TV does not display analog channel
  • Resolves an issue where no image after moving to wide mode settings
  • Resolves an issue where duplicate service number displayed in the EPG for different services
  • Resolves an issue where no sound after finishing a Netflix episode and auto play to the next
  • Resolves an issue where lip sync occur after AC power cycle with Media Device
  • Improves performance and stability of overall UI (user interface) operation
  • Improves general performance of the TV

Previous Benefits and Improvements

The following benefits and improvements are also included in this update.

  • Resolves an issue where picture in digital broadcast becomes brighter after exit from Netflix playback on HDR 5.1 content

Restrictions

  • Only for use with TV sold in Asia Pacific. Not all models are sold in all countries.

Preparation

Check the software version

Your software may already be up to date. If you're not sure, it's easy to check which software version you have - follow these instructions:

  1. Turn on your TV and press the [HELP] button on the remote to display the Customer Support Menu.
  2. Navigate to [Contact & Support] and press [Enter].
  3. The model and the software version should be displayed on the top right-hand corner of the screen: "v60105" - if the version number is "v60105", you already have the most recent firmware.

There are 2 ways to update the firmware on your BRAVIA TV:

  • Using the "System software update" feature (easy)
  • Using a USB flash drive
Using the "System software update" feature (easy):

Sony provides software updates in order to enhance functionalities and provide users with the latest TV experience. The easiest way to receive software updates is via the internet connection to the TV.
If you get the notification for a system software update, you can install it from the Home Menu.

The new firmware update will be rolling out gradually to all Internet-connected TVs over the weeks following its release.

IMPORTANT: The following "System Requirements," "File Info," "Download" and "Install," sections relate to the USB flash drive update procedure.You can ignore them if you completed the update using the "System software update" feature.

For other FAQs about Troubleshooting, please see the "Questions and Answers" on the Sony Support Site.


Using a USB flash drive:

You can also update the software by using a USB flash drive. If an Internet connection is not set up on your TV, or you don’t want to wait for the update via "System software update" feature, try to download and update using a USB flash drive as instructed below.

System Requirements

What You Need

  • a computer with access to the Internet
  • a USB flash drive
    * You can update your TV even if there are other files in the USB flash drive.

File Info

File Name

  • Firmware update to v60105 for TV

Zip File Name

  • sony_atvondfull_braviavu1_60105000_wwa_auth.zip

File Version

  • 60105

File Size

  • 670 954 528 bytes

Release Date

  • 10-06-2020

Download

Important Notice

  • Read the instructions carefully or you could end up causing the TV to become unresponsive or require a repair.
  • Do not turn the TV off - or disconnect it from the power - while it's updating.
  • Do not press any buttons, except the ones mentioned in the instructions.

How to download the Updater

Before you install the update, you'll need to download it from the Internet and save it to a USB flash drive.

  1. Download the update file to your PC.
    1. Click the [Download] button on the top of this page, then read and accept the terms and conditions.
    2. Click the [Download] button on the bottom of the page to download the update file on your PC.
  2. Verify the downloaded file name and size.
    1. Go to the directory where the file was downloaded.
    2. Verify that the size of the "sony_atvondfull_braviavu1_60105000_wwa_auth.zip" file is "670 954 528" bytes.
      NOTE: For Windows PC, verify the "Size" instead of "Size on disk" on the Properties screen.
  3. Insert the USB flash drive into your PC.
  4. Copy or drag and drop the file "sony_atvondfull_braviavu1_60105000_wwa_auth.zip" to the root directory of your USB device.
    NOTE: "The root directory" is the first or top-most directory of the device, which contains all the other folders.
  5. Remove the USB flash drive from your computer and continue to the next section.

Install

Step 1: Install the update

Once you've downloaded the update file and prepared your USB device, you can install it on your TV. The process can take up to 15 minutes and during the installation your TV will turn off before turning itself back on. Please follow the simple steps below:

  1. Turn on the TV.
  2. Make sure that no USB devices are inserted into your TV.
  3. Insert your USB flash drive containing the file "sony_atvondfull_braviavu1_60105000_wwa_auth.zip" into a USB port of the TV set.
    NOTE: Any USB slot can be used if the TV has multiple USB ports.
  4. Once the USB flash drive has been detected, a series of different messages will appear on the TV set. Follow the on-screen instructions.
    NOTE: If the messages do not appear automatically, try turning the TV off and on with the remote control.
  5. When the file is finished copying from the USB flash drive, the update process will begin, the POWER indicator on the TV will begin flashing amber.
  6. After several minutes, the TV will turn off and then turn back on to complete the update.
    WARNING: During the software installation process, please do not:
    • Remove the USB device
    • Turn off the TV
    • Disconnect the TV from the power supply
  7. When the software update is complete, a message appears on the TV indicating the software update is complete.
  8. Carefully remove the USB device from the USB slot.

Step 2: Check that the update was successful

Check the current software version to confirm that the update has successfully been installed.

  • If the version number is "PKG60105.xxxx", the software update was successful.
  • If the version number isn't "PKG60105.xxxx", download and install the update again.

Questions & Answers

Possible Issue During the Update

Need more information? See our FAQs about updating the software over the Internet:

  • Will my personal settings be deleted after the update?
    No, all your personal settings will be kept.

  • Can I install an older version of the software?
    No, To ensure that your TV remains at optimum performance, the installation of an older software version is not possible: the latest software version contains all the benefits and improvements of previous versions.

  • Is it normal for the TV to turn off during the update process?
    Yes, it’s normal for the TV to restart during the update process. It will take a longer time for the TV to restart while installing the new software.

What to do if you have problems updating your TV firmware

If the message "An error occurred during the software update" is displayed on the TV screen, please proceed to the following procedures for a possible solution:

  1. Make sure the TV has at least 2 GB available in the storage.
    1. Press the [HOME] button on the Remote Commander to display the Home Menu.
    2. Navigate to [Settings] and select it.
    3. Navigate to [Device Preferences] and select it.
    4. Navigate to [Storage] and select it.
    5. Navigate to [Internal Shared Storage] and select it.
    6. Navigate to [Available] and check the current available storage.
  2. Turn off the TV by pressing the [POWER] button on the TV set.
  3. Press the [POWER] button again, and proceed with the installation process again.
  4. If the message "No newer version of the TV software was found" is displayed on the TV screen, your TV already has the newest software version installed, so you don't need to update it.

NOTE: If you are trying to update the software using a USB flash drive, make sure your USB flash drive is in good working order.

For other FAQs about Troubleshooting, please see the "Questions and Answers" section on theSony Support Site.