Article ID : 00135581 / Last Modified : 01/08/2018

How to hear the television sound through the speakers of a stereo receiver or home theater system.

Applicable Products and Categories of This Article

The two most common methods to allow the television sound be heard through the speakers of a stereo receiver or home theater system are:

  • HDMI connection using the Audio Return Channel (ARC) feature(Preferred method)
  • Connection using Coaxial Digital Cable, Optical Digital Cable, or Audio Cable

Follow the instructions below for either of these two methods:

IMPORTANT: The methods provided below are the most common. For model-specific information about other possible connections and system settings, refer to the operating instructions supplied with your products.

NOTE: Separate steps are available  when connecting a disc player, cable set-top box, satellite receiver or other source device to the audio system.

Option 1: HDMI connection using the ARC  feature:

Image

NOTES:

  • Both devices being connected must support the ARC feature. HDMI ports may be marked with ARC to show which one to use.  If not, check your product manual or specifications to see if the ARC feature is supported.
  • If you find that your TV, A/V receiver or home theater (HT) system does not support ARC, you will need to use Option 2: Coaxial Digital Cable, Optical Digital Cable, or Audio Cable to connect your devices.
  1. Make sure that both devices support ARC functionality.
  2. Make sure that the TV and receiver are connected using an HDMI cable.
  3. Connect the cable to the HDMI port that is labeled ARC or the port identified in your manual that supports ARC.
  4. Turn on the Control for HDMI setting on both the TV and the  receiver or home theater system.

    NOTE: The steps required to enable the Control for HDMI feature may vary. Check the operating instructions supplied with the devices for model-specific steps.

Option 2: Connection using Coaxial Digital Cable, Optical Digital Cable, or Audio Cable:

Image

  1. NOTE: You can find these cables and more through the Parts & Accessories website.

    1. Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack of the television.
    2. Connect the other end of the cable to the corresponding jacks on the stereo receiver or home theater system.

      NOTE: Depending on the stereo receiver or home theater system being used, the audio input may be labeled TV INPUT or VIDEO INPUT.

    3. Turn on the television.
    4. Set the television sound to the desired setting of either Fixed or Variable .
    5. Turn on the stereo receiver or home theater system.
    6. Set the stereo receiver or home theater system to the proper input.

If there is no sound from Home Theater/AV receiver, refer to No sound from BRAVIA Android TV from Home Theater/AV receiver. (Only applicable for Android TV)