Article ID : 00153286 / Last Modified : 24/05/2018

Noise appears in fast moving scenes, between scene switches, or at screen edges in fast moving scenes.

Applicable Products and Categories of This Article

Motionflow creates interpolated images to make the picture smooth. This may cause noise to appear in the following situations.

  • Switching between scenes or fast moving scenes
  • On the screen edges in fast moving scenes

If you are bothered by the noise, change the Motionflow settings following the steps below.

  1. Press the ACTION MENU button on the remote control.
  2. Select Picture adjustments or Picture in the Display & Sound category. 
  3. Select Advanced settings.
  4. Highlight Motion.
    Image
  5. Press the right button to highlight Motionflow.
    Image
  6. Select Motionflow.
  7. The video you are playing is displayed on the screen. Select a mode that reduces the noise while watching the screen.
    Image

    NOTE: If Motionflow is set to Custom mode, adjust the Smoothness with the following procedure.
    1. Select Motionflow.
    2. Select Custom.
      Image
    3. Select Smoothness.
      Image

If noise is not reduced even after trying the procedure above, set Motionflow to Off.